document number: 83517 for technical questions, contact: optocoupleranswe rs@vishay.com www.vishay.com rev. 2.1, 10-mar-11 1 this datasheet is subject to change without notice. the product described here in and this datasheet are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 optocoupler, phototransistor output, ac input, sop-4l, long mini-flat package TCLT1600 vishay semiconductors description the TCLT1600 consists of a phototransistor optically coupled to 2 gallium arsenide infrared-emitting diodes in an sop6 4-pin wide body package. the elements are mounted on one leadframe providing a fixed distance between input and output for highest safety requirements. agency approvals ? ul1577, file no. e7 6222 system code u, double protection ? csa 22.2 bulletin 5a, double protection ? din en 60747-5-2 (vde 0884)/din en 60747-5-5 (pending), available with option 1 ? bsi iec 60950; iec 60065 features ? low profile package ? extra low coupling capa city - typical 0.2 pf ? high common mode rejection ?ac input ? creepage current resistance according to vde 0303/iec 60112 comparative tracking index: cti ? 175 ? creepage distance > 8 mm ? compliant to rohs directive to 2002/95/ec and in accordance weee 2002/96/ec applications ? switch-mode power supplies ? line receiver ? computer periph eral interface ? microprocessor system interface ? reinforced isolation provides circuit protection against electrical shock (safety class ii) ? circuits for safe protective separation against electrical shock according to safety cla ss ii (reinforced isolation): - for appl. class i - iv at mains voltage ? 300 v - for appl. class i - iii at mains voltage ? 600 v according to din en 60747-5-2 (vde 0884) 17297_3 4 1 2 3 v de 17295-3 ordering information TCLT1600 part number agency certified/package ctr (%) ul, cul, vde, bsi 80 to 300 smd-4, miniflat, long TCLT1600 absolute maximum ratings (t amb = 25 c, unless otherwise specified) parameter test condition symbol value unit input forward current i f 60 ma forward surge current t p ? 10 s i fsm 1.5 a power di ssipation p diss 100 mw junction temperature t j 125 c output collector emitter voltage v ceo 70 v emitter collec tor voltage v eco 7v collector current i c 50 ma collector peak current t p /t = 0.5, t p ? 10 ms i cm 100 ma power di ssipation p diss 150 mw junction temperature t j 125 c 10.2 mm s op-4l
www.vishay.com for technical questions, contact: optocoupleranswe rs@vishay.com document number: 83517 2 rev. 2.1, 10-mar-11 this datasheet is subject to change without notice. the product described here in and this datasheet are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 TCLT1600 vishay semiconductors optocoupler, phototransi stor output, ac input, sop-4l, long mini-flat package notes ? stresses in excess of the absolute maximum ratings can cause pe rmanent damage to the device. functional operation of the devic e is not implied at these or any other conditions in excess of those given in the operational sections of this document. exposure to abs olute maximum ratings for e xtended periods of the time ca n adversely affect reliability. (1) refer to reflow profile for soldering conditions for surface mounted devices. note ? minimum and maximum values are tested requierements. typical va lues are characteristics of the device and are the result of en gineering evaluations. typical values are for information only and are not part of the testing requirements. note ? according to din en 60747-5-2 (see figure 2). this optoco upler is suitable for sa fe electrical isolation only within the safet y ratings. compliance with the safety ratings shall be ensured by means of suitable protective circuits. coupler isolation test voltage (rms) v iso 5000 v rms total power dissipation p tot 250 mw operating ambient temperature range t amb - 55 to + 100 c storage temperature range t stg - 55 to + 150 c soldering temperature (1) t sld 260 c electrical characteristcs (t amb = 25 c, unless otherwise specified) parameter test condition symbol min. typ. max. unit input forward voltage i f = 50 ma v f 1.25 1.6 v junction capacitance v r = 0 v, f = 1 mhz c j 50 pf output collector emi tter voltage i c = 1 ma v ceo 70 v emitter collec tor voltage i e = 100 a v eco 7v collector ermitter cut-off current v ce = 20 v, i f = 0, e = 0 i ceo 10 100 na coupler collector emitter sa turation voltage i f = 10 ma, i c = 1 ma v cesat 0.3 v cut-off frequency v ce = 5 v, i f = 10 ma, r l = 100 ? f c 110 khz coupling capaci tance f = 1 mhz c k 0.3 pf current transfer ratio (t amb = 25 c, unless otherwise specified) parameter test condition symbol min. typ. max. unit i c /i f v ce = 5 v, i f = 5 ma ctr 80 300 % safety and insulation rated parameters parameter test condition symbol min. typ. max. unit partial discharge test voltage - routine test 100 %, t test = 1 s v pd 2kv partial discharge test voltage - lot test (sample test) t tr = 60 s, t test = 10 s, (see figure 2) v iotm 8kv v pd 1.68 kv insulation resistance v io = 500 v r io 10 12 ? v io = 500 v, t amb = 100 c r io 10 11 ? v io = 500 v, t amb ? 150 c (construction test only) r io 10 9 ? forward current i si 130 ma power dissipation p so 265 mw rated impulse voltage v iotm 8kv safety temperature t si 150 c absolute maximum ratings (t amb = 25 c, unless otherwise specified) parameter test condition symbol value unit
document number: 83517 for technical questions, contact: optocoupleranswe rs@vishay.com www.vishay.com rev. 2.1, 10-mar-11 3 this datasheet is subject to change without notice. the product described here in and this datasheet are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 TCLT1600 optocoupler, phototransi stor output, ac input, sop-4l, long mini-flat package vishay semiconductors fig. 1 - derating diagram fig. 2 - test pulse diagram for sample test according to din en 60747-5-2; iec60747-5-5 fig. 3 - test circuit, non-saturated operation fig. 4 - switching times 0 25 50 75 125 0 50 100 150 200 300 t si - safety temperature (c) 150 100 250 phototransistor p so (mw) ir-diode i si (ma) t 13930 t 1 , t 2 = 1 to 10 s t 3 , t 4 = 1 s t test = 10 s t stres = 12 s v iotm v pd v iowm v iorm 0 t 1 t test t tr = 60 s t stres t 3 t 4 t 2 switching characteristics (t amb = 25 c, unless otherwise specified) parameter test condition symbol min. typ. max. unit delay time v s = 5 v, i c = 2 ma, r l = 100 ? , (see figure 3) t d 3s rise time v s = 5 v, i c = 2 ma, r l = 100 ? , (see figure 3) t r 3s turn-on time v s = 5 v, i c = 2 ma, r l = 100 ? , (see figure 3) t on 6s storage time v s = 5 v, i c = 2 ma, r l = 100 ? , (see figure 3) t s 0.3 s fall time v s = 5 v, i c = 2 ma, r l = 100 ? , (see figure 3) t f 4.7 s turn-off time v s = 5 v, i c = 2 ma, r l = 100 ? , (see figure 3) t off 5s turn-on time v s = 5 v, i f = 10 ma, r l = 1 k ? , (see figure 4) t on 9s turn-off time v s = 5 v, i f = 10 ma, r l = 1 k ? , (see figure 4) t off 10 s channel i channel ii 95 10804 r g = 50 t p t p = 50 s t = 0.01 + 5 v i f 0 50 100 i f i c = 2 ma; adjusted through input amplitude oscilloscope r l = 1 m c l = 20 pf t p t t 0 0 10 % 90 % 100 % t r t d t on t s t f t off i f i c t p pulse duration t d delay time t r rise time t on (= t d + t r ) turn-on time t s storage time t f fall time t off (= t s + t f ) turn-off time 96 11698
www.vishay.com for technical questions, contact: optocoupleranswe rs@vishay.com document number: 83517 4 rev. 2.1, 10-mar-11 this datasheet is subject to change without notice. the product described here in and this datasheet are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 TCLT1600 vishay semiconductors optocoupler, phototransi stor output, ac input, sop-4l, long mini-flat package fig. 5 - test circuit, saturated operation package dimensions in millimeters package marking channel i channel ii 95 10843 r g = 50 t p t p = 50 s t = 0.01 + 5 v i c i f 0 50 1 k i f = 10 ma oscilloscope r l c l 20 pf 1 m 15243 10.2 + 0.3 - 0.4 7.5 0.2 0.1 0.1 0.7 + 0.3 - 0.4 2.54 nom. pin no. 1 identification technical drawings according to din specifications 8.2 10.8 possible footprint 2.54 0.9 4.1 max. 3.8 2 2.3 max. 1 2 4 3 0.45 0.1 drawing-no.: 6.544-5331.01-4 issue: 1; 04.04.00 0.2 + 0.10 - 0.05 0 to 8 21764-137 TCLT1600 v yww u 68
document number: 91 000 www.vishay.com revision: 11-mar-11 1 disclaimer legal disclaimer notice vishay all product, product specifications and data ar e subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicab le law, vishay disc laims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, incl uding without limitation specia l, consequential or incidental dama ges, and (iii) any and all impl ied warranties, including warran ties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of pro ducts for certain types of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in gene ric applications. such statements are not binding statements about the suitability of products for a partic ular application. it is the customers responsibility to validate that a particu lar product with the properties described in th e product specification is su itable for use in a particul ar application. parameters provided in datasheets an d/or specifications may vary in different applications and perfo rmance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product co uld result in person al injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk and agr ee to fully indemnify and hold vishay and it s distributors harmless from and against an y and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that vis hay or its distributor was negligent regarding the design or manufact ure of the part. please contact authorized vishay personnel t o obtain written terms and conditions regarding products designed fo r such applications. no license, express or implied, by estoppel or otherwise, to any intelle ctual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners.
|
